The history of the Thomson Electrak® actuator goes back to the development of ball screw actuators 40 years ago in Marengo, IL, USA. The first generation of general purpose actuators were developed for control of accessory drives on garden tractors and farm equipment. Since that simple beginning, actuators are now used in all types of equipment to automate a process, remove people from dangerous situations, provide remote control or make difficult, tedious manual jobs easier. Thomson actuators are easy to mount and operate, require no maintenance, don't leak hydraulic fluid, are easy to incorporate into an automated process and once installed they will work reliably under the toughest conditions year after year. Replacing hydraulic or pneumatic cylinders with electrical linear actuators means a simpler and smaller installation, easier control, lower energy costs, higher accuracy, less maintenance, less noise and a cleaner, healthier environment

---

Elektrines pavaros.pdf

---

Elektrinis-linijinis cilindras Electrak 1 yra skirtas nesunkiom operacijom atlikti, kur reikalinga trumpa eiga ir yra nedaug vietos. Pavara gali būti komplektuojama su 12, 24 arba 36 VDC varikliais ir gali atlaikyti iki 340 N apkrovas. Fiksuoti cilindro padėtis galima pasirenkant galinių padėčių išjungėjus. Cilindro koto eigos padėtį galima sekti per grįžtamąjį ryšį – potenciometrą. Ši pavara užtikrins nepertraukiamą operacijos atlikimą, net atšiauriomis klimatinėmis sąlygomis, kai pavarą veiks ektremalios temperatūros ir didelė drėgmė.

 Pagrindinės savybės

• Mažas, tvirtas, patikimas;
• Maitinimas - 12, 24 ar 36 VDC;
• Eiga nuo 20 – 150 mm;
• Apkrova iki 340 N;
• Greitis iki 75 mm/s;
• Maks. 25% darbo ciklo;
• IP65;
• Šiluminė variklio apsauga;
• Slydimo sraigtas laiko apkrovą, kai maitinimas atjungtas;
• Galinių padėčių išjungėjai ir grįžtamasis ryšys per potenciometrą;
• Nereikalauja techninės priežiūros 

---

Electrak 1.pdf  <> Instrukcija.pdf

---

Designed as a smaller sibling to the Electrak HD actuator, these smart electric linear actuators pack a big punch relative to their compact size and dutifully perform in the harshest environments without the need for service or maintenance. Onboard controls open the door to a wide range of possibilities, including CAN bus options and low-level switching with or without position feedback.

Electrak MD Feature Highlights:
Onboard electronics
Built-in J1939 or CANopen CAN bus
Overload protection
Electronic trip point calibration
End-of-stroke, voltage, current monitoring
Standard anti-rotation actuation
CE, RoHS, REACH (CU) compliant
Dynamic motor braking
Self-locking lead nut
Temperature monitoring
Temperature compensation

Electrak MD Electronics Options:
EXX: Monitoring System (EMS) only
EXP: EXX+Analog Position Output
LXX: EXX+Low Level Signal Switching
LLX: EXX+LXX+End of Stroke Output
LXP: EXX+LXX+Analog Position Output
CNO: Can Bus J1939 Control + Open Loop Speed Control
XXX = Internal End-of-Stroke Limit Switches
XXP = XXX + Analog (Potentiometer) Position Output
LLP = LLX + Analog (Potentiometer) Position Output
COO = CAN bus CANopen control + open loop speed control

---

Electrak MD.pdf  <> Electrak MD brošiūra.pdf <> Instrukcija.pdf

---

The new Thomson Max Jac^® linear actuator is one of the most rugged actuators you can find on the market today.  It incorporates decades of experience Thomson has gained from making linear actuators for the mobile-off-highway market. The Max Jac is built to perform in harsh environments and materials, such as fertilizers, mud, sand, high pressure water, slush, salt water, snow, heat or heavy vibrations - and requires little or no maintenance and service.  Max Jac's design provides both high durability and high performance - delivering high speed, ef­ficiency, and accuracy from a compact envelope

Max Jac Features and Benefits
long life and reliability
small envelope w/stainless steel adapter
up to 100% duty cycle performance
suitable solution for pneumatic conversions
maintenance free with high degree of corrosion protection
non-contact analog or encoder position feedback options
high speed and efficiency
minimal backlash and vibration resistant
built for harsh temperature ranges
built for high pressure water jet washdowns
built to cope with harsh dust, dirt and mud environments

---

Max Jac.pdf  <> Max Jac brošiūra.pdf <> Instrukcija.pdf

---

Ushering in the next evolution of electric actuators, the Thomson Electrak XD is strong enough to take on hydraulic applications while, at the same time, be smarter, smaller and more efficient than competitive technologies. On top of its strength (up to 25,000 N loads), the XD offers extensive protection against even the harshest conditions and ingress, and features enhanced controllability and diagnostics via onboard controls.

Electrak XD Feature Highlights:
Dynamic/static loads up to 25000/32000 N
Stroke up to 1200 mm
Speed up to 75 mm/s
Duty cycle up to 100% depending on loading condition
Life up to 275000 cycles
Internal load holding brake
Optional shock load dampening
Manual override in case of power failure
Constant monitoring and diagnostics
Onboard electronics
IP69K (static), IP67 (static) and IP66 (dynamic)
Low level switching
Bus systems (CANopen® or SAE J1939)

Electrak XD Option Highlights:
LXX = low-level signal motor switching
LXP = low-level signal motor switching + position feedback output
LXF = low-level signal motor switching + force feedback output
LLX = low-level signal motor switching + end-of-stroke indication outputs
LLP = low-level signal motor switching + position feedback + end-of-stroke indication outputs
PLS = low-level signal motor switching + programmable end-of-stroke limits
COO = CANOpen + open loop speed control (includes diagnostics, position feedback, overload indication plus static and dynamic force feedback)
CNO = CANbus J1939 + open loop speed control (includes diagnostics, position feedback, overload indication plus static and dynamic force feedback)

---

Electrak XD.pdf 

---

These smart electromechanical actuators are highlighted by onboard electronics that can eliminate the need for standalone controls. Higher power (up to 16 kN) opens a new, wider range of hydraulic applications to electric conversion. And they meet the most extreme OEM component environmental acceptance tests, including IP69K.

Electrak HD Feature Highlights:
Built-in SAE J1939 CAN bus or CANopen
Synchronization option
Overload Protection
Electronic trip point calibration
End-of-stroke, voltage, current monitoring
Standard anti-rotation actuation
Integrated manual override input
CE, RoHS, REACH (EU) Compliant
On-board electronics
Dynamic / Holding brake
Temperature monitoring
Temperature compensation
Flying lead cables
Front/rear clevis options

Electrak HD Electronics Options:
EXX: Monitoring System (EMS) only
ELX: EXX+End of Stroke Indication Output
EXP: EXX+Analog Position Output
EXD: EXX+Digital Position Output
ELP: ELX+Analog Position Output
ELD: ELX+Digital Position Output
LXX: EXX+Low Level Signal Switching
LLX: EXX+LXX+End of Stroke Output
LXP: EXX+LXX+Analog Position Output
CNO: Can Bus J1939 Control + Open Loop Speed Control
COO: Can Bus CANOpen Control + Open Loop Speed Control

---

Electrak HD.pdf <> Instrukcija.pdf

---

Designed for long life, high duty cycle and the ability to work in the harshest environments, these smart electric linear actuators with brushless motors deliver bar-setting, world-class performance with 100% duty cycle and up to 600 km (375 miles) of maintenance-free life. The Electrak LL high duty cycle actuator is well suited for many applications – most notably mobile battery powered ones – that previously have had to employ more expensive and complex solutions.

Electrak LL Feature Highlights:
Long-life ball screw and nut assembly
Long-life load-bearing design
Long-life manual override design
Efficient long-life brushless motor
Brushless motor drive system
Specially designed onboard control, meeting railway safety standards (EN 50155, EN 60077, EN 4554)
CE, RoHS, REACH compliant
UV-resistant surface treatment
Thomson Electronic Monitoring Package safety functionalities
High corrosion protection

Electrak LL Option Highlights:
LEX = Electronic Monitoring Package + low-level signal motor switching + external end-of-stroke limit switch inputs
All stainless steel external hardware
4 kN at 30 mm/s or 6 kN at 15 mm/s
Up to 500 mm stroke length

---

Electrak LL.pdf <> Instrukcija.pdf

---

Electrak GX actuators utilize a robust screw assembly for applications requiring load capacities up to 2000 lbf (9 kN), while a wrap spring holding brake or an anti-back drive acme nut (depending on the load rating selected) holds loads in place when the actuator is not in use. The Electrak GX brings customization to the forefront with numerous standardized options for end mounting as well as many stroke length offerings to best fit your application.

Electrak GX Features
Stainless steel extension tube
Overload clutch protection for mid/end of stroke
Auto reset thermal switch for motor protection
Load holding brake with automatic activation
Rugged spur gearing
Lifetime gear lubrication
Self-locking acme screw design
Protective seal
Clevis mounting

Electrak GX Options
Potentiometer
Manual override
Alternate end mounting options
Connector options

---

Electrak GX.pdf <> Instrukcija.pdf

---

Electrak LA14  elektrinis cilindras išsiskiria savo korozijai atspariu aliuminio korpusu. Korpusas turi T-formos griovelius, ant kurių lengva tvirtinti magnetinius padėčių daviklius, kurie reaguoja į pavaroje integruotą magnetą.

 Pagrindinės savybės

• Maitinimas: 12, 24 arba 36VDC;
• Eiga: iki 600 mm;
• Apkrova: iki 6800 N;
• Greitis: iki 61 mm/s;
• Maks. 25% darbo ciklo;
• Apsaugos klasė: IP65;
• Nerūdyjančio plieno stūmuoklis;
• Korozijai atsparus aliuminis korpusas;
• Su slydimo arba riedėjimo sraigtu;
• Sankaba apsauganti nuo perkrovos;

---

Electrak LA14.pdf <> Instrukcija.pdf

---

Elektrinė pavara Electrak LA24 - elektrinis cilindras sukurtas sunkiom darbo sąlygoms atlaikyti. Pavara komplektuojama su riedėjimo ar slydimo veržlės sraigtu ir kintamos srovės varikliu. Šis modelis išsiskiria stipria ir patikima savo konstrukcija, kurios pagrindą aliuminio profilis. Aliuminio korpusas turi T-formos griovelius, ant kurių lengva tvirtinti magnetinius padėčių daviklius.

 Pagrindinės savybės

• Maitinimas: 230 @ 1Φ arba 400 @ 3Φ VAC;
• Eiga: iki 600 mm;
• Apkrova: iki 6800 N;
• Greitis: iki 52 mm/s;
• Maks. 25% darbo ciklo;
• Apsaugos klasė: IP45;
• Nerūdyjančio plieno stūmuoklis;
• Korozijai atsparus aliuminis korpusas;
• Su slydimo arba riedėjimo sraigtu;
• Sankaba apsauganti nuo perkrovos;

---

Electrak LA24.pdf <> Instrukcija.pdf

---

Elektrinė pavara Electrak Throttle sukurta automatiniam akseleratoriaus valdymui mobilioje technikoje. Paprasta instaliacija, kompaktiškas ir patikimas korpusas užtikrina plačias panaudojimo galimybes ne tik mašinose, bet ir pramonėje.

 Pagrindinės savybės

• Maitinimas: 12, arba 24 VDC;
• Eiga: 50.8 mm;
• Apkrova: iki 130 N;
• Greitis: iki 96 mm/s;
• Maks. 50% darbo ciklo;
• Apsaugos klasė: IP67, IP69K
• Nereikalingas techninis aptarnavimas;
• Rankinis prasukimas dingus įtampai;
• Analoginis atbulinis signalas, galiniai išjungėjai arba CANBUS (J1939) 

---

Electrak Throttle.pdf <> Instrukcija.pdf

---